SKU: 0010019356
Vaillant turboTEC pro VUW 282 / 5-3 dual-circuit gas boiler
Turbocharged wall-mounted and dual-circuit gas boiler
Integrated secondary heat exchanger
Possibility of setting to partial power in heating mode
Advanced electronic control system
Boiler Model Vaillant turboTEC pro VUW 282/5-3
Boiler Type Wall-mounted turbocharged double-circuit gas boiler
Installation Type Wall-mounted Combustion Type Closed combustion chamber (turbo)
DHW Preparation Integrated plate heat exchanger
Useful Thermal Power Range (80/60°C) 9.4–28.9 kW Rated Heat Load 31.1 kW Domestic Hot Water Flow Rate (ΔT = 30 K) 13.4 l/min Heating Temperature Adjustment Range 30–80°C Maximum Flow Temperature 85°C Maximum Gas Consumption 3.2 m³/h Flue / Air Duct Connection 60/100 mm Gas Connection 15 mm → R 3/4" Heating Circuit Connection R 3/4" Water Connections R 3/4" → R 1/2" Dimensions (H × W × D) 800 × 440 × 338 mm
Weight (empty) 45 kg - Gas wall-mounted double-circuit boiler with built-in domestic hot water preparation
- The power of the device is regulated by a modulating burner
- Hot water temperature control
- Automatic switching to the mode of preparation of domestic hot water at its consumption from 1.5 l / min. and power control of the device depending on the flow rate and temperature of the heated water
- Forced evacuation of combustion products through a certified chimney/air duct system (for turboTEC pro)
Equipment
- LCD display with backlight, push-button control
- Internal software for status monitoring, parameter setting and troubleshooting
- Built-in flow plate heat exchanger for water heating
- Built-in circulation pump, closed expansion tank, automatic air vent, automatic adjustable bypass valve, safety valve, motorized priority diverter valve
- "Intelligent" pressure control in the heating system
- Copper primary heat exchanger with average efficiency >= 91%
- Chrome nickel steel burner
- Permanent frost protection
- Protection against jamming of the pump and three-way valve
- WINTER / SUMMER switch
- Possibility of setting to partial power in heating mode
- Electronic ignition and control of all functions
- Integrated switching module for eBus interface
- ATTENTION! A set of service taps is not included in the scope of supply and must be purchased separately (article 0010040214)
Installation options
- Heating and built-in hot water supply
- Suitable for residential buildings and apartments under reconstruction and under construction, where it is not possible to install a conventional chimney
- Possibility of installation in a residential area
- Minimum side clearance required is 10 mm, all nodes are accessible from the front
NOT USED IN CASCADE INSTALLATIONS
Turbocharged boiler
Depending on the design solution of the boiler room, it allows organizing an air supply and smoke exhaust system through the wall.
Atmospheric boilerThe boiler uses air taken from the room for combustion and requires a classic chimney for the natural removal of combustion products.
